Home page New Garden
Click for New Garden, Pennsylvania Forecast Webmaster@newgarden.org

Stormwater


Glossary
Best Management Practices (BMPs)
Methods, measures, or practices that are determined to be reasonable and cost-effective means for a landowner to meet certain, generally nonpoint source, pollution control needs. BMPs include structural and nonstructural controls and operation and maintenance procedures.

Clean Water Act (CWA)
The Clean Water Act (formerly referred to as the Federal Water Pollution Control Act or Federal Water Pollution Control Act Amendments of 1972), Public Law 92-500, as amended by Public Law 96-483 and Public Law 97-117, 33 U.S.C. 1251 et seq. The Clean Water Act (CWA) contains a number of provisions to restore and maintain the quality of the nation's water resources. One of these provisions is section 303(d), which establishes the TMDL program.

Discharge
Flow of surface water in a stream or canal or the outflow of groundwater from a flowing artesian well, ditch, or spring. Can also apply to discharge of liquid effluent from a facility or to chemical emissions into the air through designated venting mechanisms.

EPA Region 3's MDAS (Mining Data Analysis System)
A comprehensive data management and modeling system that is capable of representing pollutant loading from point and nonpoint sources in specific watersheds, as well as simulating in-stream processes.

EPA's BASINS (Better Assessment Science Integrating Point and Nonpoint Sources)
A computer-run tool that contains an assessment and planning component that allows users to organize and display geographic information for selected watersheds. It also contains a modeling component to examine impacts of pollutant loadings from point and nonpoint sources and to characterize the overall condition of specific watersheds.

Impaired Segments
Waterbodies (i.e., stream reaches or lakes) that have been placed on the Section 303(d) list because they exceed water quality standards for one or more pollutant(s).

Load allocation (LA)
The portion of a receiving water's loading capacity that is attributed either to one of its existing or future nonpoint sources of pollution or to natural background sources. Load allocations are best estimates of the loading, which can range from reasonably accurate estimates to gross allotments, depending on the availability of data and appropriate techniques for predicting the loading. Wherever possible, natural and nonpoint source loads should be distinguished.

Margin of Safety (MOS)
A required component of the TMDL that accounts for the uncertainty about the relationship between the pollutant and the quality of the receiving waterbody (CWA section 303(d)(1)(C)). The MOS is normally incorporated into the conservative assumptions used to develop TMDLs (generally within the calculations or models) and approved by EPA either individually or in state/EPA agreements.

National Pollutant Discharge Elimination System (NPDES)
The national program for issuing, modifying, revoking and reissuing, terminating, monitoring, and enforcing permits, and imposing and enforcing pretreatment requirements, under Sections 307, 402, 318, and 405 of the Clean Water Act. Facilities subjected to NPDES permitting regulations include operations such as municipal wastewater treatment plants and industrial waste treatment facilities.

Natural background levels
Natural background levels represent the chemical, physical, and biological conditions that result from natural changes to the earth's surface, such as weathering or decay.

Nonpoint source
Pollution that is not released through pipes but rather originates from multiple sources over a relatively large area. Nonpoint sources can be divided into source activities related to either land or water use including failing septic tanks, improper animal-keeping practices, forestry practices, and urban and rural runoff.

Point source
Pollutant loads discharged at a specific location from pipes, outfalls, and conveyance channels from either municipal wastewater treatment plants or industrial waste treatment facilities. Point sources can also include pollutant loads contributed by tributaries to the main receiving water stream or river.

Pollutant
A contaminant that is discharged to a waterbody, resulting in the impairment of that waterbody. Types of pollutants include dredged spoil, solid waste, incinerator residue, sewage, garbage, sewage sludge, munitions, chemical wastes, biological materials, radioactive materials, heat, wrecked or discarded equipment, rock, sand, cellar dirt and industrial, municipal, and agricultural waste discharged into water (CWA Section 502(6)).

Public comment period
The time allowed for the public to express its views and concerns regarding action by EPA or the states.

Runoff
That part of precipitation, snowmelt, or irrigation water that runs off the land into streams or other surface water. It can carry pollutants from the air and land into receiving waters.

Sewage treatment plant
A system that uses the process of purifying mixtures of human and other wastes by aerobic and/or anaerobic means in the treatment of municipal sewage or industrial wastes of a liquid nature.

Stakeholders
Those parties likely to be affected by the TMDL.

Total Maximum Daily Load (TMDL)
The sum of the individual wasteload allocations (WLAs) for point sources, load allocations (LAs) for nonpoint sources and natural background, and a margin of safety (MOS). TMDLs can be expressed in terms of mass per time, toxicity, or other appropriate measures that relate to a state's water quality standard.

Wasteload allocation (WLA)
The portion of a receiving water's loading capacity that is allocated to one of its existing or future point sources of pollution (e.g., permitted waste treatment facilities).

Water quality criteria
Elements of state water quality standards expressed as constituent concentrations, levels, or narrative statement, representing a quality of water that supports a particular use. When criteria are met, water quality will generally protect the designated use.

Water quality standard
State or federal law or regulation consisting of a designated use or uses for the waters of the United States, water quality criteria for such waters based upon such uses, and an antidegradation policy and implementation procedures. Water quality standards protect the public health or welfare, enhance the quality of water and serve the purposes of the Clean water Act.

Watershed
A drainage area or basin in which all land and water areas drain or flow toward a central collector such as a stream, river, or lake at a lower elevation